Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts
    Join Date
    May 2009
    Location
    Phoenix,AZ
    Posts
    254
    Rep Power
    0

    How in the world do I....

    Reset the developer Icon in the display of a AR M162? I've searched and there is no DV calibration. Where is the DV reset? Not under any of the 20's codes I can find. Reset PM didn't help. WTF?
    Roy


  2. #2
    Master Of The Obvious 10,000+ Posts
    How in the world do I....

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,197
    Rep Power
    244

    Re: How in the world do I....

    You're correct, sir. There is no stir, but you can reset the developer message in 20-01. =^..^=

    Correction: Damn, you're right, it's 42-01. CRS

    Last edited by blackcat4866; 09-27-2013 at 02:06 AM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts
    How in the world do I....

    brewster67's Avatar
    Join Date
    Jul 2011
    Location
    Fairbanks
    Posts
    145
    Rep Power
    15

    Re: How in the world do I....

    This machine was set up like the old Sharp's where DV counter clear is at sim 42-1


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here