Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    sharp ar-m450 E6-11, E6-14 codes when using the spf.

    walterman's Avatar
    Join Date
    May 2013
    Posts
    196
    Rep Power
    24

    sharp ar-m450 E6-11, E6-14 codes when using the spf.

    I am working on a ar-m450 and am having troubles when using the spf. I have preformed a sim 63-2, cleaned the white reference sheet, reseated all the conectors to the mfp board and still the mfp will say waiting when I put paper in the spf and will not 2- side scan. Do I need to replace the CIS board? Any other suggestions?

  2. #2
    Service Manager 250+ Posts Silvertoast's Avatar
    Join Date
    Feb 2010
    Location
    pensacola
    Posts
    270
    Rep Power
    32

    Re: sharp ar-m450 E6-11, E6-14 codes when using the spf.

    both codes realted to the cis and the scanner pwb.

    see if your second side cis lights up, if so may be the scanner pwb

  3. #3
    Senior Tech 100+ Posts
    sharp ar-m450 E6-11, E6-14 codes when using the spf.

    walterman's Avatar
    Join Date
    May 2013
    Posts
    196
    Rep Power
    24

    Re: sharp ar-m450 E6-11, E6-14 codes when using the spf.

    Thank you, I will test the CIS unit to see if it lights up. I also would like to make a correction, I meant scanner control pwb, not the mfp.

  4. #4
    Senior Tech 250+ Posts lky1978's Avatar
    Join Date
    Mar 2009
    Location
    perak malaysia
    Posts
    472
    Rep Power
    36
    please replace the cis harness cable.

  5. #5
    Senior Tech 100+ Posts
    sharp ar-m450 E6-11, E6-14 codes when using the spf.

    walterman's Avatar
    Join Date
    May 2013
    Posts
    196
    Rep Power
    24

    Re: sharp ar-m450 E6-11, E6-14 codes when using the spf.

    I reseated the harness and flat cable, I ran a simulation 5-3 and still no CIS lamp on. I will place a document in the feeder and single side will scan good. If I press 2 sided scan the mfp tells me that the b\w scan module is out of service. The stange thing is the customer told me that after they scan multiple documents, then use the glass, the mfp just says waiting and nothing will happen. Unfortunately, I don't have any boards to swap and try. Any ideas?

  6. #6
    Legendary Frost Spec Tech 2,500+ Posts
    sharp ar-m450 E6-11, E6-14 codes when using the spf.

    Akitu's Avatar
    Join Date
    Oct 2010
    Location
    Thompson, MB
    Posts
    2,596
    Rep Power
    97

    Re: sharp ar-m450 E6-11, E6-14 codes when using the spf.

    You were advised to replace flat harness cable and scan pwb, but you only reseated. Try replacing the harness cable as advised and see if it resolves your issue. If it doesn't, your problem is very likely the scan control pwb and you'll need to either figure out how to get a replacement, or sell your customer a new machine.
    Cthulhu for president! Why settle for the lesser evil?

  7. #7
    Field Supervisor 500+ Posts DINGO's Avatar
    Join Date
    Nov 2007
    Posts
    662
    Rep Power
    40

    Re: sharp ar-m450 E6-11, E6-14 codes when using the spf.

    Good night, this issue the most probably cause is the harness cable, like some friends above sugested.
    good look

  8. #8
    Senior Tech 250+ Posts
    sharp ar-m450 E6-11, E6-14 codes when using the spf.

    Toner Boy's Avatar
    Join Date
    Aug 2007
    Location
    upper half, CA
    Posts
    337
    Rep Power
    38

    Re: sharp ar-m450 E6-11, E6-14 codes when using the spf.

    Especially if it is one of the early versions where it makes a hard U-turn into the feeder cover, the later release of the feeder cover has the harness hole in a more forgiving location and is LESS prone to failure.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here