Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior member of CRS 2,500+ Posts
    FYI for Jupiter 3 Machines

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,367
    Rep Power
    102

    FYI for Jupiter 3 Machines

    To save you some dis-assembly time, if you have void areas running down the page in paper direction travel (prints or copies), check your foam filters on the DV unit before removing the left cover and LSU assembly. If they are not fully seated, it will block the laser beam.
    "You can't trust your eyes, if your mind is out of focus" --

  2. #2
    Master Of The Obvious 10,000+ Posts
    FYI for Jupiter 3 Machines

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: FYI for Jupiter 3 Machines

    Now that's experience talking. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior member of CRS 2,500+ Posts
    FYI for Jupiter 3 Machines

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,367
    Rep Power
    102

    Re: FYI for Jupiter 3 Machines

    Quote Originally Posted by blackcat4866 View Post
    Now that's experience talking. =^..^=
    Yep, and it won't happen again without checking the filters.
    "You can't trust your eyes, if your mind is out of focus" --

  4. #4
    Service Manager 250+ Posts Silvertoast's Avatar
    Join Date
    Feb 2010
    Location
    pensacola
    Posts
    270
    Rep Power
    32

    Re: FYI for Jupiter 3 Machines

    very nice info. havent seen this yet but have seen the little white labels on process units and dv units peel up and block the laser. that cost me a couple of hours b4 i figured that out. lol

  5. #5
    Senior Tech 250+ Posts lky1978's Avatar
    Join Date
    Mar 2009
    Location
    perak malaysia
    Posts
    472
    Rep Power
    36
    thanks for your info.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here