Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Trusted Tech 50+ Posts Kyocop's Avatar
    Join Date
    Nov 2010
    Location
    Iaqua, Ca
    Posts
    69
    Rep Power
    0

    Question MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    Removed the above machine from customers business back to shop. Tray 1 and 2 were working fine at customers but now back at shop shows paper empty on 1 and 2 apparently because lift motors are not raising. Connectors appear fine...but I must be missing something that is affecting both.

    Any ideas?

    Thanks in advance for any advice!

  2. #2
    Senior Tech 250+ Posts harleyrider's Avatar
    Join Date
    Oct 2011
    Location
    ,il
    Posts
    348
    Rep Power
    31

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    Will they run at all in simulation? I think it is 6-1 if I remember right.

  3. #3
    Trusted Tech 50+ Posts Kyocop's Avatar
    Join Date
    Nov 2010
    Location
    Iaqua, Ca
    Posts
    69
    Rep Power
    0

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    Nope, no go in sim. All the connections seem to be fine as well (have the back cover off as we speak). The boards show no sign of damage either (there seems to have been a little rough handling in the moving of the copier). CLUM1 and CLUM2 do not seem to respond. Therefore the number 1 and number 2 trays do not register having paper in them.
    Last edited by Kyocop; 10-17-2013 at 10:02 PM.

  4. #4
    Senior Tech 250+ Posts harleyrider's Avatar
    Join Date
    Oct 2011
    Location
    ,il
    Posts
    348
    Rep Power
    31

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    I have had the "black box behind the trays go bad. Test the size sensors in 4-2?

  5. #5
    Trusted Tech 50+ Posts Kyocop's Avatar
    Join Date
    Nov 2010
    Location
    Iaqua, Ca
    Posts
    69
    Rep Power
    0

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    looking.....although thought that was for LCC only so looking

  6. #6
    Trusted Tech 50+ Posts Kyocop's Avatar
    Join Date
    Nov 2010
    Location
    Iaqua, Ca
    Posts
    69
    Rep Power
    0

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    DLUM1 and DLUM2 in 4-3 pop off immediately.

  7. #7
    Senior Tech 100+ Posts
    MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    brewster67's Avatar
    Join Date
    Jul 2011
    Location
    Fairbanks
    Posts
    167
    Rep Power
    29

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    Have you tried the paper feed trouble clear. Its either sim 15 or 17.

  8. #8
    Trusted Tech 50+ Posts Kyocop's Avatar
    Join Date
    Nov 2010
    Location
    Iaqua, Ca
    Posts
    69
    Rep Power
    0

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    Quote Originally Posted by brewster67 View Post
    Have you tried the paper feed trouble clear. Its either sim 15 or 17.

    Yea, absolutely no response. And it is 17. So the tray asks for paper even when half full. What is weird is it is both motors....so hunting that common denominator that would link this double trouble.

  9. #9
    Trusted Tech 50+ Posts Kyocop's Avatar
    Join Date
    Nov 2010
    Location
    Iaqua, Ca
    Posts
    69
    Rep Power
    0

    Re: MX-4101n Tray 1&2 lift motors do not work after transporting machine....

    Traced the fault to a connector on the Main PWB...Thanks so much for the suggestions.....

    Roth On!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here