Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    Mx-c311 transfer belt replacement tips?

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,043
    Rep Power
    0

    Mx-c311 transfer belt replacement tips?

    Client brought the mx-c311 from another location and we are helping out for now. It needs a transfer assembly replaced and was wondering if there are any tips on doing this job.

    thanks all!

    kelly


  2. #2
    The Wolf 1,000+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    C-town
    Posts
    1,629
    Rep Power
    47

    Re: Mx-c311 transfer belt replacement tips?

    It is a unit. Remove old one, install the new one, calibrate and your done.
    These are by far the easiest Sharp machines when it come to maintenance.




    Failing to plan is planning to fail!!!

  3. #3
    Senior Tech 250+ Posts
    Mx-c311 transfer belt replacement tips?


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    403
    Rep Power
    23

    Re: Mx-c311 transfer belt replacement tips?

    If it is the only one that needs to replace, I would purchase unit.

    But if you are buying kit. Not to bad. Front cover of pri transfer comes off by removing 1 screw and slide to left. Bottom rails and charge comes off easy enough. Remove handle on top right and cleaning section on left side. You will see 2 blue shoulder screws 1/3 from the left on front and back, remove and it will allow you to fold transfer section. Take belt off and rollers are exposed. Careful with belt, do not want kinks in them.

    Hopefully, I did not confuse you. I do not believe it would be that difficult.


  4. #4
    Trusted Tech 50+ Posts
    Mx-c311 transfer belt replacement tips?

    havokprod's Avatar
    Join Date
    Oct 2012
    Location
    Los Angeles CA
    Posts
    54
    Rep Power
    11

    Re: Mx-c311 transfer belt replacement tips?

    Wrong Thread Sorry

    Last edited by havokprod; 10-22-2013 at 06:39 PM. Reason: Wrong thread sorry

  5. #5
    Service Manager 10,000+ Posts
    Mx-c311 transfer belt replacement tips?

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: Mx-c311 transfer belt replacement tips?

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com


  6. #6
    Legend in the Making 2,500+ Posts
    Mx-c311 transfer belt replacement tips?

    Akitu's Avatar
    Join Date
    Oct 2010
    Location
    Thompson, MB
    Posts
    2,605
    Rep Power
    85

    Re: Mx-c311 transfer belt replacement tips?

    Buy the service manual, it will save you a headache. Don't take more than a single session rebuilding it as there are so many parts you may forget where you started, especially if you're trying to do it without the manual.

    Cthulhu for president! Why settle for the lesser evil?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here