A co-worker went to a MX-4111 for POD1_S jams, and the copier has 1500 total copies.
He took out the delivery unit and fusing unit, to try and correct issue. When he reinstalled the units, the machine continuously says the right door is open.
In 30-1, the DSW-F and DSW-R are both highlighted. I understand the DSW-F will be lit in 30-1, if DSW-R is not activated, so I am not concerned to much about DSW-F. The DSW-R switch is working, we tested the switch. We did not get to test the connection at the PWB, they were closing up shop.
He had the machine unplugged while working on it and did not remove back cover, so I am not thinking he sparked a board, but I guess a possibility. I am feeling that it is something stupid and hoping someone has run into a similar situation.
Thanks for any help.
Bookmarks