Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 250+ Posts
    MX4111N - Right door open


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    459
    Rep Power
    37

    MX4111N - Right door open

    A co-worker went to a MX-4111 for POD1_S jams, and the copier has 1500 total copies.

    He took out the delivery unit and fusing unit, to try and correct issue. When he reinstalled the units, the machine continuously says the right door is open.

    In 30-1, the DSW-F and DSW-R are both highlighted. I understand the DSW-F will be lit in 30-1, if DSW-R is not activated, so I am not concerned to much about DSW-F. The DSW-R switch is working, we tested the switch. We did not get to test the connection at the PWB, they were closing up shop.

    He had the machine unplugged while working on it and did not remove back cover, so I am not thinking he sparked a board, but I guess a possibility. I am feeling that it is something stupid and hoping someone has run into a similar situation.

    Thanks for any help.

  2. #2
    Legendary Frost Spec Tech 2,500+ Posts
    MX4111N - Right door open

    Akitu's Avatar
    Join Date
    Oct 2010
    Location
    Thompson, MB
    Posts
    2,596
    Rep Power
    97

    Re: MX4111N - Right door open

    You had the delivery unit taken out, the plugs which connect to the delivery unit are on the same harness as the front door switch. The front & right door switches interlock on their circuits. Check to make sure the delivery unit is plugged in correctly and there are no bent pins as well.
    Cthulhu for president! Why settle for the lesser evil?

  3. #3
    Senior Tech 250+ Posts
    MX4111N - Right door open


    Join Date
    Oct 2008
    Location
    Manchester, NH
    Posts
    459
    Rep Power
    37

    Re: MX4111N - Right door open

    The connectors were in correctly.

    Checked continuity in active and inactive states with both DSW-R and DSW-F. Continuity came back fine from PCU and DC PWB.

    The problem was with DC PWB, swapped boards with another copier and problem followed DC PWB.

    Thanks for the help.

  4. #4
    Master Of The Obvious 10,000+ Posts
    MX4111N - Right door open

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: MX4111N - Right door open

    Congratulations! =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Service Manager 100+ Posts glewisme's Avatar
    Join Date
    Nov 2009
    Location
    scarborough,me
    Posts
    240
    Rep Power
    32

    Thumbs up Re: MX4111N - Right door open

    Still cleaning up after others I see Mark!! LOL

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here