Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 28
MX 3110
Not so much a code as an error message stating that the black drum has less than 10% remaining. Is this just a general warning or will this shut the machine down at 0%? How is this message reset, at new unit install or manually in the service codes? Thank you
-
Re: MX 3110
If PM alerts are still enabled (on by default) then the machine will stop with a DK code and require it to be cleared. You can clear the PM counters under SIM 24. To disable PM alerts, go to SIM55-3, set SW to 9 and set DATA number 5 to 1.
-
Re: MX 3110
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:
www.justmanuals.com
paul@justmanuals.com
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks