My cartridge is full of toner but my mahcine is dispalayed after the message your tone is low the change the toner cartridge message and i can not work with even touch panel
please help me about troobleshooting
is it possible that my chip of toner failed to work and must be replaced
thanks a lot
Color printing with lowest cost per page is my love.
Make sure you have an original toner...Compatible toner such as katun i encountered thesame scenario most of the time. User can save a couple of bucks purchasing compatible toner but didn't anticipate that it will double incase the chip in the toner didn't detect by the machine.
Please help me about solution:if i take out the incompatible toner without changing toner chip , and refilling with ACM Toner japan , is it possible that the problem will be solved .
thanks a lot for helpful information
In service menu
How to set developer density rate?
Color printing with lowest cost per page is my love.
Not possible what you are suggesting,Still the chip will reset the toner indicator. its better to bring an original one. To calibrate developer simulation 25-2 Good luck...
If you are just changing toner, there is no need to run 25-2 and should not be run. 25-2 is to set DV when first installed.
How about all these threads, that cover the same topic?:
http://www.copytechnet.com/forums/sh...ner-in-ar-m450
http://www.copytechnet.com/forums/sh...ner-for-ARM450
There are other threads. You might make use of the search function. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks