ARM350 with E7-02 error

[axyun]

Think LSU board might be bad.



Does whole lasr unit have to be ordered. I tried to get part number off board and saw "N1455FCE1" so I assumed it was CPWBN1455FCE1 but got "invalid part number" at Sharp-Service.



Any info is very much appreciated. Frank/ActionPhotocopy

[MHeon71]

I do not think you can just replace the laser PWB. I do not have that manual for the AR-M350, but the AR-M355 parts manual only gives you the option to purchase the polygon motor or the whole LSU.

[axyun]

Thanks Mark.

[blackcat4866]

I do not think you can just replace the laser PWB. I do not have that manual for the AR-M350, but the AR-M355 parts manual only gives you the option to purchase the polygon motor or the whole LSU.

Ditto that. You can get the polygon mirror motor, but nothing else separately. There's a bulletin somewhere to that effect. It looks as though you'll have to splurge on the assembly. =^..^=

[axyun]

It could actually be PCU. I was hoping LSu as it was less expensive and when I saw part # on board I was hoping it was available separately. Time for a drink. Have a good weekend. Frank