Thanks Thanks:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Junior Member
    Join Date
    Jan 2015
    Location
    Westfield, MA
    Posts
    6
    Rep Power
    0

    Re: MX-M264N cooking DC power supply

    I've discovered the hard way (our shop smoked two fusers with this issue) that one of the plugs on the DC board doesn't plug in where it looks like it should. There are two nearly identical two-prong connectors on the board, and if you pick the wrong one, you send power directly to the fuser lamp as soon as you plug it in. It's surprisingly easy to do (even though it's red to match the harness) because the correct plug is hidden behind a heatsink. I think it's kind of weird that there is a live, exposed plug up front on the board, but that's the way they made it. I hope this helps out.
    IMG_20170313_160310809 (1).jpgIMG_20170313_160339225 (1).jpg


  2. #12
    Master Of The Obvious 10,000+ Posts
    MX-M264N cooking DC power supply

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,334
    Rep Power
    247

    Re: MX-M264N cooking DC power supply

    Good catch. =..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here