Quote Originally Posted by blackcat4866 View Post
This next contribution is from a long time friend of Copytechnet:

...... He needs to run the Blk Mag Adjust in 50-28, restart the machine when completed, run Print/Setup adjust also in 50-28, restart the machine, then run the calibration as normal.

The scanner cant read the required area of the print as its either too long or short by required spec. Its seeing the image but advises to place the patches on the glass as it cant read it properly.


=^..^=
This is what I do if SIM 50-22 or SIT will not scan. Fixes it every time.