Thanks:
0
Dislikes:
0
-
ARM317 with error A0-01
Have customer with AR-M317 which evidently has Data Security kit installed. When I attempted to add Fax kit(FX7) I got an error A0-01 when machine was powered on. Is there a way around this. If i were able to get the fax rom card from DSK and installed on fax board connector C11 would that do the trick?
I don't suppose there is a way to disable data security through key operator function? Any assistance is appreciated. Frank/ActionPhotocopy
-
Re: ARM317 with error A0-01
If you don't have the rom I'm pretty sure you can order from Sharp. You cannot disable DSK in system settings but you can remove it by replacing the roms with a regular set. Make sure that they don't want DSK because if you do this and then re-insert the DSK roms you will need the product key! Found this out the hard way, as usual! LOL
Good luck.
Bil
-
Re: ARM317 with error A0-01
Thanks for the help Bil. I know they don't need the security as i just sold them the machine and thought the fax kit was already installed. So when i went to add it, as customer wanted fax option, i got the problem. Will keep you posted on results. Thanks again. Frank
-
Trusted Tech
50+ Posts
- Rep Power
- 22
Re: ARM317 with error A0-01
I ran into this exact same thing recently. If you do not have the rom that came with the dsk its a no go. You will have to replace the dsk to get one with the roms. I guess the roms are married to that dsk. we just gave up on it for that machine.
-
Senior Tech
100+ Posts
- Rep Power
- 26
Re: ARM317 with error A0-01
I think you also have to install the original image board the on that piggy backs the main board, If you choose to remove the DSK
-
Re: ARM317 with error A0-01
Thanks for the helpful info guys. i will keep you posted. Frank
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks