fusing belts source

**Toner Boy** · 08-05-2014

Any feedback on Katun fuser belt kits for 2610N-5141N ?

**Akitu** · 08-05-2014

Originally Posted by Toner Boy

Any feedback on Katun fuser belt kits for 2610N-5141N ?

With all the problems these fuser belts had on launch, do you want to risk going to a non-OEM belt?

**mojorolla** · 08-05-2014

Originally Posted by Akitu

With all the problems these fuser belts had on launch, do you want to risk going to a non-OEM belt?

You took the words right out of my mouth!!!!

**Toner Boy** · 08-06-2014

Ha, I figured that question would get you guys riled up

. Just curious if anyone had some experience with them, have not ordered any as of yet, very few machines in the field so far. Saving cost is always a bonus IF they work, have limited our K parts to a couple drums and select fuser rollers over the last 10 years, most everything is OEM.
Still curious if anyone has actually used these for some length of time.

**foudl** · 08-07-2014

I have a couple of those in the field, i didn't have to change a fuser belt so far but i would like to know if some of you had prob. doing maintenance on those fuser.

**harleyrider** · 08-07-2014

foudl haven't had any problems just takes longer to do than a fuser without the belt. Normally swap them out with a rebuilt fuser and when not busy rebuild in shop.Haven't tried any Katun belts and probably will not.