I tried to upgrade firmware it fail i pressed ok the machine rebooted now its just stuck on the screen that just says sharp. I cant enter simulation mode or anything.
I tried to upgrade firmware it fail i pressed ok the machine rebooted now its just stuck on the screen that just says sharp. I cant enter simulation mode or anything.
I tried that through my laptop it says error printing I renamed the file emupdate.sfu i used file2prn i put a pastel folder on the c drive nothing is working screen is still stuck on the sharp logo cant access the web page or anything I ping the ipadress to the copier and it says it can communicate
"You can't trust your eyes, if your mind is out of focus" --
Name file to emupdate.sfu and save to root of thumb drive. Turn off machine plug thumb drive into machine and turn on machine. Firmware will load automatically.
Bookmarks