Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Sharp AR M455

  1. #1
    Technician
    Join Date
    Oct 2007
    Location
    North Palm Beach
    Posts
    34
    Rep Power
    34

    Sharp AR M455

    I have a customer with a Sharp AR M455 that has the Security package on it. I don't think it showed this when I set it up. The accept the last page scanned screen comes on when copying from the glass. So you have to accept this screen every time you want to print. Two steps, they don't like it. Can this be removed. Not sure when it became active and cant seem to get rid of it.

    Any help will be greatly appreciated.

    Thanks,

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    May 2012
    Location
    Tomball
    Posts
    64
    Rep Power
    25

    Re: Sharp AR M455

    This normally only pops up when 2-sided copying is selected. Make sure the machine isn't defaulted to make 2-sided copies.

    If you lift the lid, place paper, close the lid and hit start it should make the copy with no further button presses. The data security kit has nothing to do with that.

    Hope this helps.

    -Copier Collin

  3. #3
    Senior Tech 250+ Posts lky1978's Avatar
    Join Date
    Mar 2009
    Location
    perak malaysia
    Posts
    472
    Rep Power
    36

    Re: Sharp AR M455

    Quote Originally Posted by colgrimes View Post
    This normally only pops up when 2-sided copying is selected. Make sure the machine isn't defaulted to make 2-sided copies.

    If you lift the lid, place paper, close the lid and hit start it should make the copy with no further button presses. The data security kit has nothing to do with that.

    Hope this helps.

    -Copier Collin
    change the message time from 6sec(default) to 1sec

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    May 2012
    Location
    Tomball
    Posts
    64
    Rep Power
    25

    Re: Sharp AR M455

    Quote Originally Posted by lky1978 View Post
    change the message time from 6sec(default) to 1sec
    There's that too...if that's what you're referring to.
    I thought you were talking about the "Read End" button when copying from the glass that pops up BEFORE you hit the start button.

    -Copier Collin

  5. #5
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: Sharp AR M455

    Go into system setting, key operations, copy setting, initial default setting, output and select auto. That should get rid of your message when you copy from the glass on single sided.

    Good luck

    Bil

    PS may not be the exact path directions but it will get you in the ballpark.

  6. #6
    Technician
    Join Date
    Oct 2007
    Location
    North Palm Beach
    Posts
    34
    Rep Power
    34

    Re: Sharp AR M455

    Maybe I'm not explaining it correctly.
    You cannot place an original on the glass and push the print button and a copy comes out.
    After hitting the print button, the screen asks if this is the last page to be scanned. You have to acknowledge this before the machine will give you a copy.
    I think because it stores the image or images before printing multiple copies. But they only want one copy and want to hit the copy button and be done.
    Thanks.

  7. #7
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: Sharp AR M455

    It sounds like the machine is in scan mode by default, instead of copy mode default.
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  8. #8
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: Sharp AR M455

    Quote Originally Posted by mlbcopiers View Post
    Maybe I'm not explaining it correctly.
    You cannot place an original on the glass and push the print button and a copy comes out.
    After hitting the print button, the screen asks if this is the last page to be scanned. You have to acknowledge this before the machine will give you a copy.
    I think because it stores the image or images before printing multiple copies. But they only want one copy and want to hit the copy button and be done.
    Thanks.
    I understand "exactly" what you are describing. Maybe you should try my post settings. What's the worst that can happen!

    Bil

  9. #9
    Owner/Service Manager 1,000+ Posts
    Sharp AR M455

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: Sharp AR M455

    Quote Originally Posted by bilyahn View Post
    I understand "exactly" what you are describing. Maybe you should try my post settings. What's the worst that can happen!

    Bil
    Bil is correct. There is SOME default function that has been changed that requires the machine to know when the last page is scanned. Whether it's duplex, stapling, grouping etc. This doesn't just happen on it's own, someone has changed it.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  10. #10
    Technician
    Join Date
    Oct 2007
    Location
    North Palm Beach
    Posts
    34
    Rep Power
    34

    Re: Sharp AR M455

    Quote Originally Posted by bilyahn View Post
    I understand "exactly" what you are describing. Maybe you should try my post settings. What's the worst that can happen!

    Bil
    Thank Bill, you were right on.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here