Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: MX-354N

  1. #1
    Trusted Tech 50+ Posts swagreis's Avatar
    Join Date
    Jun 2008
    Location
    cairo
    Posts
    91
    Rep Power
    0

    MX-354N

    Dear all
    i put a compatible toner cartridge IN MX-354N but it gives F2-70 did is there any way to recover this error
    knowing that this cartridge working good with AR-5731

  2. #2
    Legendary Frost Spec Tech 2,500+ Posts
    MX-354N

    Akitu's Avatar
    Join Date
    Oct 2010
    Location
    Thompson, MB
    Posts
    2,596
    Rep Power
    97

    Re: MX-354N

    The MXM354 series takes the MX312NT toner, not the AR310NT toner. Decipher these as required to match your locality.
    Cthulhu for president! Why settle for the lesser evil?

  3. #3
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Location
    Bristol, UK
    Posts
    1,204
    Rep Power
    56

    Re: MX-354N

    Quote Originally Posted by swagreis View Post
    Dear all
    i put a compatible toner cartridge IN...
    Always use original toner.

  4. #4
    Senior Tech 250+ Posts lky1978's Avatar
    Join Date
    Mar 2009
    Location
    perak malaysia
    Posts
    472
    Rep Power
    36

    Re: MX-354N

    Quote Originally Posted by swagreis View Post
    Dear all
    i put a compatible toner cartridge IN MX-354N but it gives F2-70 did is there any way to recover this error
    knowing that this cartridge working good with AR-5731
    FYI, SHARP MX-264, 314, 354 now with stronger security on toner chip data.
    always use genuine toner

  5. #5
    Trusted Tech 50+ Posts swagreis's Avatar
    Join Date
    Jun 2008
    Location
    cairo
    Posts
    91
    Rep Power
    0

    Re: MX-354N

    Quote Originally Posted by Akitu View Post
    The MXM354 series takes the MX312NT toner, not the AR310NT toner. Decipher these as required to match your locality.
    Dear sir sometimes in ar-5731 gives me cartridge error but by doing simulation 88-1 it works
    but this simulation needs the another entry to simulations
    but in MX-354n I don't know this entry so I am searching about this entry to make the same simulation 88-1

  6. #6
    Trusted Tech 50+ Posts swagreis's Avatar
    Join Date
    Jun 2008
    Location
    cairo
    Posts
    91
    Rep Power
    0

    Re: MX-354N

    Dear sir sometimes in ar-5731 gives me cartridge error but by doing simulation 88-1 it works
    but this simulation needs the another entry to simulations
    but in MX-354n I don't know this entry so I am searching about this entry to make the same simulation 88-1

  7. #7
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,432
    Rep Power
    54

    Re: MX-354N

    Quote Originally Posted by swagreis View Post
    Dear sir sometimes in ar-5731 gives me cartridge error but by doing simulation 88-1 it works
    but this simulation needs the another entry to simulations
    but in MX-354n I don't know this entry so I am searching about this entry to make the same simulation 88-1
    I do not think you can get to any of the 80 sim numbers anymore. I know this to be the case for the 364/365 series so if the old method of getting into elevated sims does not work then the 354 series is the same.

    Good luck.

    Bil

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here