Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Oct 2015
    Location
    Philly
    Posts
    23
    Rep Power
    5

    Looking for a broken fusing unit for Konica Minolta Bizhub c452

    So long story short my c452 has a gear that wore down inside the fusing unit. It's the first gear inside the fusing unit that meshes with the drive gear. All the other gears are fine and after close inspection whoever last worked on this machine didn't seat the unit properly and this is what caused the gear to wear down. I don't have a part number (checked in the parts manual) since these are sold as a whole assembly which cost $600 and we are a smaller business trying to save a good bit of money if possible, I'm hoping one of you fine folks might have a spare unit laying around i can pull the gear from? Any help would be greatly appreciated


  2. #2
    Senior Tech 100+ Posts
    Looking for a broken fusing unit for Konica Minolta Bizhub c452

    mx6turbo89's Avatar
    Join Date
    Oct 2013
    Posts
    152
    Rep Power
    12

    Re: Looking for a broken fusing unit for Konica Minolta Bizhub c452

    I've lost count of the amount of used ones that I've thrown away over the years. Unfortunately, I rarely see these models anymore, but I'll keep you in mind if I come across one.


  3. #3
    Technician
    Join Date
    Apr 2014
    Posts
    27
    Rep Power
    0

    Re: Looking for a broken fusing unit for Konica Minolta Bizhub c452

    Quote Originally Posted by weskes View Post
    So long story short my c452 has a gear that wore down inside the fusing unit. It's the first gear inside the fusing unit that meshes with the drive gear. All the other gears are fine and after close inspection whoever last worked on this machine didn't seat the unit properly and this is what caused the gear to wear down. I don't have a part number (checked in the parts manual) since these are sold as a whole assembly which cost $600 and we are a smaller business trying to save a good bit of money if possible, I'm hoping one of you fine folks might have a spare unit laying around i can pull the gear from? Any help would be greatly appreciated

    IMG_2877.JPGIs this gear you have been looking for?


  4. #4
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,207
    Rep Power
    72

    Re: Looking for a broken fusing unit for Konica Minolta Bizhub c452

    Quote Originally Posted by Copier Pro View Post
    IMG_2877.JPGIs this gear you have been looking for?


    1ck1zf.jpg

    Sorry, couldn't resist.


  5. #5
    Senior Tech 100+ Posts
    Looking for a broken fusing unit for Konica Minolta Bizhub c452

    mx6turbo89's Avatar
    Join Date
    Oct 2013
    Posts
    152
    Rep Power
    12

    Re: Looking for a broken fusing unit for Konica Minolta Bizhub c452

    Quote Originally Posted by weskes View Post
    So long story short my c452 has a gear that wore down inside the fusing unit. It's the first gear inside the fusing unit that meshes with the drive gear. All the other gears are fine and after close inspection whoever last worked on this machine didn't seat the unit properly and this is what caused the gear to wear down. I don't have a part number (checked in the parts manual) since these are sold as a whole assembly which cost $600 and we are a smaller business trying to save a good bit of money if possible, I'm hoping one of you fine folks might have a spare unit laying around i can pull the gear from? Any help would be greatly appreciated
    Most of the gears on the fuser are available to order:

    C652 Fuser Pg 1.jpgC652 Fuser Pg 2.jpg


  6. #6
    Technician
    Join Date
    Oct 2015
    Location
    Philly
    Posts
    23
    Rep Power
    5

    Re: Looking for a broken fusing unit for Konica Minolta Bizhub c452

    Quote Originally Posted by Copier Pro View Post
    IMG_2877.JPGIs this gear you have been looking for?
    That looks like the gear that connects from the outside of the fusing unit... Or does it mesh with the same gear on the inside?


  7. #7
    Technician
    Join Date
    Apr 2014
    Posts
    27
    Rep Power
    0

    Re: Looking for a broken fusing unit for Konica Minolta Bizhub c452

    Quote Originally Posted by weskes View Post
    That looks like the gear that connects from the outside of the fusing unit... Or does it mesh with the same gear on the inside?
    It's the Fuser Drive Gear that has 24 teeth.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here