Originally Posted by
weskes
So long story short my c452 has a gear that wore down inside the fusing unit. It's the first gear inside the fusing unit that meshes with the drive gear. All the other gears are fine and after close inspection whoever last worked on this machine didn't seat the unit properly and this is what caused the gear to wear down. I don't have a part number (checked in the parts manual) since these are sold as a whole assembly which cost $600 and we are a smaller business trying to save a good bit of money if possible, I'm hoping one of you fine folks might have a spare unit laying around i can pull the gear from? Any help would be greatly appreciated
Bookmarks