+ Reply to Thread
Results 1 to 4 of 4

Thread: E-Studio 3511 - How can I find out how much life is left on my Drum, Fuser etc?

  1. #1
    Technician CRC2k is on a distinguished road
    Join Date
    May 2008
    Posts
    21
    Rep Power
    4

    E-Studio 3511 - How can I find out how much life is left on my Drum, Fuser etc?

    Hello All,

    How can i Find out how much life is left on my Drum & fuser on the 3511?

    Thanks.

  2. #2
    Technician Julio119 is on a distinguished road
    Join Date
    Nov 2007
    Location
    California
    Posts
    23
    Rep Power
    5

    PM Mode

    Hi there, Turn the machine off, then power it on while holding 6 + Start , let go till you hear a bip. that should take you into the maintenance mode.

  3. #3
    Senior Tech 100+ Posts Sbarro is on a distinguished road Sbarro's Avatar
    Join Date
    Feb 2008
    Location
    Szczecin
    Posts
    159
    Rep Power
    6
    Don't forget to press 2 and START after that
    Better way is to print this.
    START+9 / Power ON , then press 103 and START.
    "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

    "
    What do you despise? By this you are truly known"

    Guess who

  4. #4
    service tech 250+ Posts just a tech is on a distinguished road just a tech's Avatar
    Join Date
    Jan 2007
    Location
    georgia
    Posts
    250
    Rep Power
    9
    And to add something further if i may.. The numbers you will see will only be as accurate as the tech that performed the replacements last. So if they replaced anything and did not reset the maint. count, then you numbers won't be accurate. good luck..

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts