Estudio 3511 Paper Draw Noise

[CRC2k]

Hello all,

On my 3511, whenever I open the top paper draw and close it, I hear a bunch of clicks/grinding noise as it lifts the paper. The draw works perfectly with the expection of this noise. Any idea what this can be? Is there a calibration I have to run on that lift motor?

Also, if anyone knows were I can get the latest firmware for that model, please let me know!

Thanks
Chris

[TommiTMX]

	Quote:			Originally Posted by CRC2k
	Hello all, On my 3511, whenever I open the top paper draw and close it, I hear a bunch of clicks/grinding noise as it lifts the paper. The draw works perfectly with the expection of this noise. Any idea what this can be? Is there a calibration I have to run on that lift motor? Also, if anyone knows were I can get the latest firmware for that model, please let me know! Thanks Chris

Hi CRC2k,
At the back of the machine there is a lift motor assembly white plastic cover, remove the assembly and open the cover.
Inside there will be a set of gears check these and also check the actual cover of the assembly, sometimes the pillars that the gears sit on crack, thats generally the problem I've found.

[wtroll]

Hi,
TommiTMX was right.
Put your lift motor assembly on a table and open it carefully, otherwise all gears and springs will go anywhere!

Luca

[CRC2k]

Thanks everyone... Ill check it out on monday!