hello all, i have toshia e-studio 453 and i change drum and i clean all imagin unit now ??? any idea ?
thanks
IMG_0155.jpg
hello all, i have toshia e-studio 453 and i change drum and i clean all imagin unit now ??? any idea ?
thanks
IMG_0155.jpg
main charge is most likely the problem.
I'm leaning toward developing roller/bearings or developer bias contact. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I'd go with BC.
Looks like a few metal staples/bearing shards shorting out contact for the dev bias.
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
The Bias shaft is worn where the bias spring is attachet change or check magnet roller for por contact!
Good Luck
Bookmarks