Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Jun 2015
    Posts
    48
    Rep Power
    18

    Estudio 356Se error C410

    Does anyone encounter this kind of error C410 in the Toshiba Photocopier machine. Always appear lcd screen. I already reset the counter using 08 then 2002 and clear 0, but still appearing on it? pls kindly help me with this error.

    Thank you in advance.

  2. #2
    Technician davod.mardani's Avatar
    Join Date
    Feb 2015
    Posts
    32
    Rep Power
    0

    Re: Estudio 356Se error C410

    Thermostat has been disconnected check it's conectivity.

    Sent from my SM-N900 using Tapatalk

  3. #3
    Master Of The Obvious 10,000+ Posts
    Estudio 356Se error C410

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: Estudio 356Se error C410

    Congratulations on executing the fuser error clear. Maybe now would be a good time to fix the cause? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Technician
    Join Date
    Jun 2015
    Posts
    48
    Rep Power
    18

    Re: Estudio 356Se error C410

    Quote Originally Posted by davod.mardani View Post
    Thermostat has been disconnected check it's conectivity.

    Sent from my SM-N900 using Tapatalk

    i took out the part of fuser set and open, i find the two thermostat inside which being pinned well or screwed, i did not see any loose connection or disconnection of wire in the thermostat. How do i know that thermostat busted or defective? please help what im going to do or best advice about this the problem to solve?

  5. #5
    Technician
    Join Date
    Jun 2015
    Posts
    48
    Rep Power
    18

    Re: Estudio 356Se error C410

    Quote Originally Posted by blackcat4866 View Post
    Congratulations on executing the fuser error clear. Maybe now would be a good time to fix the cause? =^..^=

    what is your best advice to resolve this error ? please help me...

  6. #6
    Senior Tech 250+ Posts
    Join Date
    May 2011
    Posts
    401
    Rep Power
    31

    Re: Estudio 356Se error C410

    thermostat can be measure using multi meter... Take out the thermostat, measure the connectivity...Another trick is shake the thermostat, u can hear sound, if no sound, keep throw on the floor until u can hear the sound...

    So far I never encountered thermostat problem on this model...

    Check also the thermistor, make sure is not dirty...

    And heater lamp, make sure is not burn...

    And the harness, connected properly, wiring not not exposed out due to insulator peel off that can cause "shorting" to the frame...

  7. #7
    Technician davod.mardani's Avatar
    Join Date
    Feb 2015
    Posts
    32
    Rep Power
    0

    Re: Estudio 356Se error C410

    Quote Originally Posted by noobie1 View Post
    i took out the part of fuser set and open, i find the two thermostat inside which being pinned well or screwed, i did not see any loose connection or disconnection of wire in the thermostat. How do i know that thermostat busted or defective? please help what im going to do or best advice about this the problem to solve?
    Test the thermostat conectivity with multimeter. If the thermostat was discontinued insert it into freezer for few hours and check it again!
    Quote Originally Posted by didi2005 View Post
    thermostat can be measure using multi meter... Take out the thermostat, measure the connectivity...Another trick is shake the thermostat, u can hear sound, if no sound, keep throw on the floor until u can hear the sound...

    So far I never encountered thermostat problem on this model...

    Check also the thermistor, make sure is not dirty...

    And heater lamp, make sure is not burn...

    And the harness, connected properly, wiring not not exposed out due to insulator peel off that can cause "shorting" to the frame...

    Sent from my SM-N900 using Tapatalk

  8. #8
    Technician
    Join Date
    Jun 2015
    Posts
    48
    Rep Power
    18

    Re: Estudio 356Se error C410

    Quote Originally Posted by didi2005 View Post
    thermostat can be measure using multi meter... Take out the thermostat, measure the connectivity...Another trick is shake the thermostat, u can hear sound, if no sound, keep throw on the floor until u can hear the sound...

    So far I never encountered thermostat problem on this model...

    Check also the thermistor, make sure is not dirty...

    And heater lamp, make sure is not burn...

    And the harness, connected properly, wiring not not exposed out due to insulator peel off that can cause "shorting" to the frame...

    Thank you very much for the information that you give to me.It solve my problem.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here