E Studio 350

[DANNIEBOY61]

Im Having A Prblem With A E Studio 350 It Has An F105 Code I Now Its A Hdd Problem I Replaced The Hdd With A New One But Now The Machine Will Not Boot Up I Got The Hdd In A Frys And Now I Realize The Hdd Carries The Boot Up Info Is There Any Way Of Getting The Info From One Hdd To The Other In Order To Make The Machine Work

[manuals4you]

You can clone the drive with software like Norton Ghost.

HtH

Paul@justmanuals.com

[blue4fun]

you need to format/initialize, and reload all firmware, if old firmware you need to upgrade gradually for example from 250 to 321 you have to update to 300 then 320 then 321

Im Having A Prblem With A E Studio 350 It Has An F105 Code I Now Its A Hdd Problem I Replaced The Hdd With A New One But Now The Machine Will Not Boot Up I Got The Hdd In A Frys And Now I Realize The Hdd Carries The Boot Up Info Is There Any Way Of Getting The Info From One Hdd To The Other In Order To Make The Machine Work

[DANNIEBOY61]

Where Can I Get The Firmware

[aalex_bom]

Let Upload For You

[mitsubee]

Yes you have to do a Clear+3-On Machine ,

Select 2 - Start
Off and On with Clear+3 again
Select 3 - Start
Off and On with 4+9
(wait till the machine read all then you just press Start )

Completed then Off

On + 947 - Initializes
Off and On with 0+8 - 690 - 2 - Enter

Done ( pull your thumbdrive out )