I have the book but not the firmware. I have been reading other posts about HDD errors on this box.
Looks like I'm in for a challenge.
Any suggestion would help.
Thanks
DR
I have the book but not the firmware. I have been reading other posts about HDD errors on this box.
Looks like I'm in for a challenge.
Any suggestion would help.
Thanks
DR
F106_0 ADI-HDD error: Illegal disk replacement detected (ADIHDD
Exchange to SATA-HDD
You will need firmware to reload the copier and possible a new hard drive. or to reset to the default selected drive either way it takes about an hour to do and isn't the best error to get
Clear error flag & format HDD by holding 3+C. Load latest firmware from the Toshiba partner portal. If issue persists order new hard drive & sata cable
I forgot to post this, I did get another HDD from LA Tech and they also sold me the firmware.
I called Hytec and they walked me through the procedure to install the firmware and it all
came back to life and seems to be running fine.
Thanks for the tips
DR
Bookmarks