crazy estudio 650

[esam ramadan]

it was work good i turn it off then i getout fuser unit to clean the claws and it refused to work again i dont hear or see any thing work what happend ? thaks

[esam ramadan]

any ideas guys

[imaginGuru]

Your HDD is not initializing, if not a tech, call one and save headaches.




imaginguru.

[deep]

Any error code?

[mrfuser]

Most likely blew a fuse on the power supply. Very common. Call a tech and he should be able to fix it fairly easily.

Kelly

[esam ramadan]

by the way i'm a tech - the panel don't light up so theres no eror codes finaly thanks for replies

[mckinley]

check the wiring harness for the thermistors, it may be trapped.
especially around the connector. also, if you removed the fuser unit, make sure the connectors are correct on the IH coil board.

but trapped thermistor wires will give you a dead machine.

[esam ramadan]

thank you