Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. 02-08-2017 #1
    Woody214
    Woody214 is offline
    Technician
    E studio 477sl Noisy Doc feeder

    Join Date
    Oct 2015
    Location
    Colchester, Vermont
    Posts
    29
    Rep Power
    18

    E studio 477sl Noisy Doc feeder

    This model has the loudest doc feeders I have heard, even when new it was loud. They will feed about any thickness document though, which is a plus i guess... Anyhow the drive gear on the ADF take up and feed roller assembly does not mesh well with it's counter part on the rear of the ADF drive assembly. There seems to be no adjustment whatsoever to improve (tighten) the engagement of these gears, other than holding down the rear of the ADF top cover. Is there a modification or something else that I am unaware of?
    Reply With Quote Reply With Quote
  2. 02-09-2017 #2
    blackcat4866
    blackcat4866 is offline
    Master Of The Obvious 10,000+ Posts
    E studio 477sl Noisy Doc feeder

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: E studio 477sl Noisy Doc feeder

    There's a bulletin on that. There's a new style top cover with an alignment notch that prevent the gears from disengaging. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Reply With Quote Reply With Quote
  3. 02-09-2017 #3
    SalesServiceGuy
    SalesServiceGuy is offline
    Service Manager 5,000+ Posts
    E studio 477sl Noisy Doc feeder

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,731
    Rep Power
    225

    Re: E studio 477sl Noisy Doc feeder

    The bulletin describes loosen the four screws that attach the rollers to the top cover, push upwards as tight as you can and re tighten. This small adjustment will make the gear teeth mesh together better if they have seperated over time.
    Reply With Quote Reply With Quote
  4. 02-12-2017 #4
    Woody214
    Woody214 is offline
    Technician
    E studio 477sl Noisy Doc feeder

    Join Date
    Oct 2015
    Location
    Colchester, Vermont
    Posts
    29
    Rep Power
    18

    Re: E studio 477sl Noisy Doc feeder

    Would you mind sending me a part number or email me copy of the bulliten with that please?
    Reply With Quote Reply With Quote
  5. 02-12-2017 #5
    blackcat4866
    blackcat4866 is offline
    Master Of The Obvious 10,000+ Posts
    E studio 477sl Noisy Doc feeder

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: E studio 477sl Noisy Doc feeder

    TSB-1728 =^..^=
    Attached Files Attached Files
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Reply With Quote Reply With Quote
« Toshiba Studio 256se periodic maintenance 0088 | Toshiba E-studio 166 toner problem (the toner is new) »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here