Results 1 to 4 of 4
  1. #1
    Field Supervisor 500+ Posts smiley's Avatar
    Join Date
    Aug 2008
    Location
    manila
    Posts
    537
    Post Thanks / Like
    Rep Power
    23

    Toshiba estudio 305 casset 2 jam problem

    Hello guys im have a problem on this model it always have a jam problem i replace separation roller clean all sensors on pick up assembly. Replace clucht and still unsolve. Please any body have a solution on this thanks.

    Attached Images Attached Images
    there is no glory without sacrifice

  2. #2
    Technician
    Join Date
    May 2015
    Posts
    33
    Post Thanks / Like
    Rep Power
    4

    Re: Toshiba estudio 305 casset 2 jam problem

    if this is similar to a 455, then check the black plastic actuator for excessive wear. they get worn down to a sharp point and need to be replaced.


  3. #3
    Master Of The Obvious 10,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    14,620
    Post Thanks / Like
    Rep Power
    235

    Re: Toshiba estudio 305 casset 2 jam problem

    Ordinarily I won't go guessing about jam codes, but this looks a bit like E130/C130 jams. Look at the sector gear on the back of the tray. Manually drive the lift plate up to confirm that the lift plate is high enough, before the sector gear touches the side rail. If you're still not getting enough lift, even with an uncracked sector gear, and the screw tight, you can add a bit of bend to the lift plate to get some additional height.


    What jam codes? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  4. #4
    Field Supervisor 500+ Posts smiley's Avatar
    Join Date
    Aug 2008
    Location
    manila
    Posts
    537
    Post Thanks / Like
    Rep Power
    23

    Re: Toshiba estudio 305 casset 2 jam problem

    Thanks for the help guys. I found the cause of jam its the mylar that block the actuator to return to position and cause jam. See my attachement i just cut some part of the mylar.

    Attached Images Attached Images
    there is no glory without sacrifice

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here