+ Reply to Thread
Results 1 to 4 of 4

Thread: toshiba e-studio200

  1. #1
    Technician rbell12 is on a distinguished road
    Join Date
    Aug 2006
    Location
    san antonio,tx
    Posts
    42
    Rep Power
    8

    Question toshiba e-studio200

    we have a customer who has this machine she wants us to check out. we work primarily w/konica-minolta. the latest intravia edition is 10, so, the only versions that i could find were the 130/150, i was wanting confirmation that getting into to the service mode and the emulation codes were relevant. thanks in advance, i appreciate any response. rb

  2. #2
    Trusted Tech 50+ Posts atudorica is on a distinguished road
    Join Date
    Oct 2007
    Location
    burnaby
    Posts
    79
    Rep Power
    5
    it is realy hard to work on
    design is like a fax machine
    fuser is small
    doctor blade gap is too small (0.25 mm)
    PM is 100k and takes a lot of work to do it

  3. #3
    Field Supervisor 500+ Posts xcopytech is on a distinguished road
    Join Date
    Aug 2006
    Posts
    599
    Rep Power
    13
    is machine e-studio 200S
    or
    e-studio 200L

    es 200s is small machine like some fax machines

    es 200L is light version of es 230, 280.

    these two machines do not have anything simillar.

  4. #4
    Senior Tech 100+ Posts Sbarro is on a distinguished road Sbarro's Avatar
    Join Date
    Feb 2008
    Location
    Szczecin
    Posts
    159
    Rep Power
    6
    Yeah, and there is E-Studio 200 too.
    Little bit older but pretty good.
    So ?
    "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

    "
    What do you despise? By this you are truly known"

    Guess who

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts