Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician
    Join Date
    Aug 2012
    Location
    Scranton
    Posts
    38
    Rep Power
    24

    Toshiba studio 757 blanks

    Machine received a power surge and took out the HDD. Error F101-4 Tried recovery,didn't work. Replaced HDD and firmware. Installation went fine but, when trying to print gamma adj. pattern - blanks. Copies are blank. I can print a grid test pattern in 04 mode but that's it. Need any suggestions.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Toshiba studio 757 blanks

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Toshiba studio 757 blanks

    System Board first, then Logic Board. Also possible SRAM. Replace them only one at a time though. Two or more at a time can be catastrophic.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Aug 2012
    Location
    Scranton
    Posts
    38
    Rep Power
    24

    Re: Toshiba studio 757 blanks

    Going out Mon. to install sys and/or lgc. Would u start with sys bd.? Have the manual and it talks about "return license". Can you give me some guidance with that?

  4. #4
    Master Of The Obvious 10,000+ Posts
    Toshiba studio 757 blanks

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Toshiba studio 757 blanks

    The Logic board is always simpler to change, as you can see.

    For the System board you can use 3C-5 Key Backup Restore (SRAM to FROM). See page 350 of the SM. If you read the description notes, on page 914 it says: [A] Return License, Notes: If the Setting Mode (08) is not started up. "[A] Return License" can be omitted.

    Omit [A] =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician
    Join Date
    Aug 2012
    Location
    Scranton
    Posts
    38
    Rep Power
    24

    Re: Toshiba studio 757 blanks

    Well that did not go well.
    Installed logic and got update errors . 00 code which just means "other error" After talking with Hytec tech service we went ahead and put in the system board and went to update and now I can't enter the update method 1,2 or three. No response from keys but I can enter the update mode with 4+9. If you have any suggestions, I need big help.

  6. #6
    Master Of The Obvious 10,000+ Posts
    Toshiba studio 757 blanks

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Toshiba studio 757 blanks

    Can you go back to new LGC + old SYS, and the SYS installation procedure? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Master Of The Obvious 10,000+ Posts
    Toshiba studio 757 blanks

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Toshiba studio 757 blanks

    Quote Originally Posted by Fattdaddy View Post
    Well that did not go well.
    Installed logic and got update errors . 00 code which just means "other error" After talking with Hytec tech service we went ahead and put in the system board and went to update and now I can't enter the update method 1,2 or three. No response from keys but I can enter the update mode with 4+9. If you have any suggestions, I need big help.
    Did you install the new SYS board with the old SRAM? Preferably yes. One at a time. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Technician
    Join Date
    Aug 2012
    Location
    Scranton
    Posts
    38
    Rep Power
    24

    Re: Toshiba studio 757 blanks

    Quote Originally Posted by blackcat4866 View Post
    Can you go back to new LGC + old SYS, and the SYS installation procedure? =^..^=
    Nope Cant get to update

  9. #9
    Technician
    Join Date
    Aug 2012
    Location
    Scranton
    Posts
    38
    Rep Power
    24

    Re: Toshiba studio 757 blanks

    Quote Originally Posted by blackcat4866 View Post
    Did you install the new SYS board with the old SRAM? Preferably yes. One at a time. =^..^=
    Yes on new Sys and old SRAM One at a time?

  10. #10
    Master Of The Obvious 10,000+ Posts
    Toshiba studio 757 blanks

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Toshiba studio 757 blanks

    You can still try old SYS with new SRAM. That's about all I've got.

    Here's the theory: Machine data are stored in three locations. If the machine can identify two like batches of data it can update the third to be the same. It the machine identifies three different batches of data it is confounded, can't decide what to do. So always change only one of these three data sources at a time, and complete the installation procedure before moving onto the next possibility.

    That being said, you may have passed beyond the point of no return. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here