E-Studio CF20

[ZeusGT]

Hey guys, I just started working on toshibas and I have a Toshiba E-Studio 3511 in the field with a CF20 code when you try to copy in color mode or print in color mode. Does anybody know what this means? Thanks

[mckinley]

normally it's the revolver motor at fault, check if the gear on the motor is gold coloured, if it is then it's the old type, the new motors have a dark grey gear. also check that no teeth are missing on the revolver unit.

make sure it's properly cleaned out, or it will keep coming back to bite you.

[ZeusGT]

Hey, thanks for the advice. I will check those things out and see what's going on.
I did some research and I found that it's an auto color sensor error. It gave a couple of things to check for... Thanks again..