This is an intermittent problem. I just sold this machine and it did not display this type of problem while I was preping
it for sale. And I ran about 500 pages through the feeder without a line on the page.
I can run his machine and it seldom shows. As soon as he runs it, the line appears.
His settings are NON Sort/NON Staple, 1-2 sided, text.
I have gone over the adjustments twice now to make sure it did not move during shipping. I used the pegs on the hinge
to align it to the glass. After that I re-adjusted for a straight copy. Before this the line was only down part of page. About
2 or 3mm from the edge.
It looks to me like a slow feed. The mylar guides to the scan glass were a little wrinkled. I was able to cut the worst parts
out. Not very much really. I checked and cleaned the rollers while I had the guide off. The other day I was out and took the
one-way pulley off for the registration roller and cleaned and re-lubed it. I did scuff the shaft with a file as it was very smooth and
shinny. I ran 50 or 60 pages through the feeder, no problem. The first set he ran, had the line. Only now it was all the way down
the page. At least it was straight. So I'm inclined to think that rules out the mylar guide to the glass.
My question is how many of us have had this problem and did replacing the one-way pulley fix it?
Or is there something I overlooked?
Yes I do have both manuals for the main frame and the feeder.
Thanks
DR
Bookmarks