Toshiba es 603

[zoka4175]

Hello!
I have problem on es 603.When i turn on machine on display i have a message HDD mount failed.It is impossible to go in 05 and 08 mode.I try to reinstall the software but i have a message hdd update failed.I check hard drive and memory and it works on other machine.Then i replace sys pwb from another machine and it work for one day.After that next day i have the same error message.Deos anybody know how to resolve this problem.
Thanks.

[branislav]

[quote=zoka4175;40180]Hello!
I have problem on es 603.When i turn on machine on display i have a message HDD mount failed.It is impossible to go in 05 and 08 mode.I try to reinstall the software but i have a message hdd update failed.I check hard drive and memory and it works on other machine.Then i replace sys pwb from another machine and it work for one day.After that next day i have the same error message.Deos anybody know how to resolve this problem.
Thanks.[/quote


I have same poblem with machin TOSHIBA e studio 600

[Sbarro]

You have to enter C + 3 on power on. Then choose 3 and enter. Then reload firmware.

[zoka4175]

Dear Sbarro I try to do 3 and C but machine show initialization error.

[tsbservice]

Have you tried to replace the cables between HDD and SYS board?

[zoka4175]

I have this problem on two machines in two days.Machines are booth on same place.

[tsbservice]

I would double check electricity at customer's site, could be also Power supply unit.

[zoka4175]

I think that there is no problem with electricity because there is anoter 3 machines that works fine without problems.

[Sbarro]

Any others , RAM's ??

[xcopytech]

power supply, check for 3.3, 5.1 and 12 V on CN405.

something kill your sys board.

also as tsbservice said check eletricity at customer site.

which software version you have on machine?