i have toshiba 456 with yellow dot
upgrade frimware with red dot
error f350
upgrade with yellow frimware FAILED01
.how to fix?
i have toshiba 456 with yellow dot
upgrade frimware with red dot
error f350
upgrade with yellow frimware FAILED01
.how to fix?
Telegram ID : @armanmahzun
You can order a new scanner logic board, or send in your board to Hytec and have it initialized and proper firmware loaded. Do you have a board repair service available in your country?
In the future, keep in mind that the only difference is the scanner firmware. If you de-select the scanner firmware update, you can use either yellow dot or red dot. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
[QUOTE=blackcat4866;590164]You can order a new scanner logic board, or send in your board to Hytec and have it initialized and proper firmware loaded. Do you have a board repair service available in your country?
In the future, keep in mind that the only difference is the scanner firmware. If you de-select the scanner firmware update, you can use either yellow dot or red dot. =^..^=[/QUOTE
What if you don't have access to Edoc in the case of Xerox repairs ?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Use jig to update firmware~~~
Bookmarks