toshiba 305 firmware issue
dear friends .. i try to update firmware to estudio 305 .. it will almost finish .. atlast it needs to intialise settings . sram requires intialisation .. i am trying to selact intialise but in touch panel intialise and cancel both of them is not working anybody have solution??
If your firmware update finished correctly, then the next step would have been to power back up in 08 and key in 9030 to initialize. SRAM initialization would have nothing to do with a normal firmware update.
but friend intialise option is not active in toch panelOriginally Posted by gliderider
Does the touch panel work in normal copy mode? Is it aligned? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks