Hi guys, i got a Toshiba es455 with an error E190. Papers not picking up from LCF. Needs new roller kits?
or something else needs to replace? I did cleaned all the rollers but still E190.
Thanks
Hi guys, i got a Toshiba es455 with an error E190. Papers not picking up from LCF. Needs new roller kits?
or something else needs to replace? I did cleaned all the rollers but still E190.
Thanks
How many clicks on the LCF rollers? Near yield? Any flats? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I haven't seen it on the KD-1026 ... but on the very similarly constructed KD-1024 I've seen a few things:
1) One of the plastic alignment posts at the rear of the feed unit shears off. The feed unit loses drive.
2) The previous tech disassembling the paper deck drive unit installs the bronze bushings with the collars to the outside of the drive pack. The bushings are supposed to be installed collars to the inside of the drive pack. Maybe I have a photo or 3 ...
Broken clutch wiring
KD-1024 clutch wiring.JPG
Broken post
E190 KD1024 before.JPG
Repaired post
KD-1024 post repaired.JPG
Bushings wrong
KD-1024 bushings wrong1.JPG
Bushings right
KD-1024 bushings correct.JPG
All these paper decks are a Ricoh design, and very similar. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
They seem to work fairly well ... other than the issue listed. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
check the interlock switches on the ped door are ok and being switched correctly
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks