is wrong firmware (updated yellow firmware instead of red firmware without scanner) the cause for f901_1 code?
# checked all Cable
#logic board is blue sticker, originally comes with machine
is wrong firmware (updated yellow firmware instead of red firmware without scanner) the cause for f901_1 code?
# checked all Cable
#logic board is blue sticker, originally comes with machine
it is covered in the manual.... did even open it?
- Code: F109_1
- Description: Key consistency error: SRAM encryption AES key data damage.
- Causes:
- Remedy: Setting Reboot the equipment. If it cannot be recovered, reinstall the software in the following procedure. (1) Install the OS data.
I'd have to guess that the wrong Logic Board is installed, in an attempt to make the machine faster. (Wrong Engine Speed Data). =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks