Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Toshiba 456 Firmware


    Join Date
    Dec 2009
    Location
    San Luis Obispo
    Posts
    194
    Rep Power
    0

    Toshiba 456 Firmware

    Anyone can help me with update or complete new Firmware for this model?

    Thanks


  2. #2
    Senior Tech 100+ Posts gkalman2004's Avatar
    Join Date
    Jul 2016
    Location
    cj
    Posts
    154
    Rep Power
    6

    Re: Toshiba 456 Firmware

    For what type of ADF? Both firmware version have 800MB
    4CCD Yellow
    3CCD - Red
    Find under the glas the Yellow or Red mark on the right corner or on the CCD.
    If you write the wrong firmware you can damage the ADF.
    Also do you must know the programing steps.


  3. #3
    Senior Tech 100+ Posts
    Toshiba 456 Firmware


    Join Date
    Dec 2009
    Location
    San Luis Obispo
    Posts
    194
    Rep Power
    0

    Re: Toshiba 456 Firmware

    Thanks for the info, I got the firmware from Toshiba, and talked to support, hopefully it will solve the problem.


  4. #4
    Master Of The Obvious 10,000+ Posts
    Toshiba 456 Firmware

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,555
    Rep Power
    272

    Re: Toshiba 456 Firmware

    Did you mention what problem you were hoping to fix? I don't think so. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Senior Tech 100+ Posts
    Toshiba 456 Firmware


    Join Date
    Dec 2009
    Location
    San Luis Obispo
    Posts
    194
    Rep Power
    0

    Re: Toshiba 456 Firmware

    The original problem was soft on/off switch doesn't work, can't prosecute 05 command then it got worst and got "can't recognize cartridge" and I can't execute 08.

    At that point I ordered the system board and logic board, I'll let you know after installation if it fix the problem.


  6. #6
    Senior Tech 100+ Posts
    Toshiba 456 Firmware


    Join Date
    Dec 2009
    Location
    San Luis Obispo
    Posts
    194
    Rep Power
    0

    Re: Toshiba 456 Firmware

    Replaced the system board, it solved the soft switch problem and the 08 setting.
    Still have the error "toner not recognized...". I changed the logic board still error, check the firmware setting it is US (NAD).
    The 2 cartridges I tried are US OEM cartridges.
    The only other option is the interface board or harness.
    Anybody ever had the need to replace those?


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here