Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts ARMAN.MZ's Avatar
    Join Date
    Sep 2016
    Location
    IRAN TEHRAN
    Posts
    100
    Rep Power
    17

    runnig time in warming up toshiba 455

    hello my friends.
    i have a toshiba 455
    time to ready in toshiba 455 is 20-30 secound

    but in my device :
    when turn on device main motor run and (warming up) 30 second
    but a normal device is :
    when turn on main motor run (warming up) under 10 second and warming up next 20 secound

    That's what I've done
    i change hdd
    update
    reset 9090
    change 08-517
    change fuser roller
    change thermistor
    reset lgc boaard
    change lgc board

    but no change
    I'm grateful for your help in solving this problem



    Telegram ID : @armanmahzun

  2. #2
    Master Of The Obvious 10,000+ Posts
    runnig time in warming up toshiba 455

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: runnig time in warming up toshiba 455

    I've seen thermostats develop resistance at 180C, so the output from the lamps decrease. I've also seen lamps with hot and cold spots. So I think that I would change the lamps and thermostats. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts ARMAN.MZ's Avatar
    Join Date
    Sep 2016
    Location
    IRAN TEHRAN
    Posts
    100
    Rep Power
    17

    Re: runnig time in warming up toshiba 455

    Quote Originally Posted by blackcat4866 View Post
    I've seen thermostats develop resistance at 180C, so the output from the lamps decrease. I've also seen lamps with hot and cold spots. So I think that I would change the lamps and thermostats. =^..^=

    ok your right
    but why main motor run 30 second
    if lamp or thermostats have problem must be error or need high time to warming up

    warming up time is ok
    my problem is main motor run 30 secound



    Telegram ID : @armanmahzun

  4. #4
    Multibrands Tech 250+ Posts rapidocument's Avatar
    Join Date
    Jul 2012
    Location
    Los Angeles, CA.
    Posts
    382
    Rep Power
    27

    Re: runnig time in warming up toshiba 455

    It might need a developer replacement,
    old developer=the machine runs longer to tone up at start and any other time during the day whenever
    the toner reference becomes low.

    Will also happen if you are using a cheap toner instead of OEM. (original).

  5. #5
    Senior Tech 100+ Posts riyadh hossainbd's Avatar
    Join Date
    Dec 2015
    Location
    motijheel,dhaka
    Posts
    238
    Rep Power
    0

    Re: runnig time in warming up toshiba 455

    Quote Originally Posted by ARMAN.MZ View Post
    ok your right
    but why main motor run 30 second
    if lamp or thermostats have problem must be error or need high time to warming up

    warming up time is ok
    my problem is main motor run 30 secound
    Main motor running time depend on specific temperature

  6. #6
    Service Manager 10,000+ Posts
    runnig time in warming up toshiba 455

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Angry Re: runnig time in warming up toshiba 455

    Quote Originally Posted by ARMAN.MZ View Post
    hello my friends.
    i have a toshiba 455
    time to ready in toshiba 455 is 20-30 secound
    but in my device :
    when turn on device main motor run and (warming up) 30 second
    but a normal device is :
    when turn on main motor run (warming up) under 10 second and warming up next 20 secound
    That's what I've done
    i change hdd
    update
    reset 9090
    change 08-517
    change fuser roller
    change thermistor
    reset lgc board
    change lgc board
    but no change
    I'm grateful for your help in solving this problem
    wow.. did you THINK ( I know you didn't post ) life of ALL consumables? yes... an older dev unit/nonOEMtoner/Thermostats can all be a factor..
    BUT we really need to see: life on parts/fuser temp settings/error logs.. ya know VITAL INFORMATION. ( do you even have service manual? )
    why go shotgunning parts BEFORE you are absolutely SURE on the cause? Could you have been my GP when I was diagnosed with Diabetes?

  7. #7
    Senior Tech 100+ Posts ARMAN.MZ's Avatar
    Join Date
    Sep 2016
    Location
    IRAN TEHRAN
    Posts
    100
    Rep Power
    17

    Re: runnig time in warming up toshiba 455

    Thank you all fixed by 05-200



    Telegram ID : @armanmahzun

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here