In es2508, after updating firmware in setting mode 08 I can only input 3 digit instead of 4 digit
I can't initialize 9030, only can enter 903. Firmware version 1033.
Thanks: 0
Likes: 0
Dislikes: 0
In es2508, after updating firmware in setting mode 08 I can only input 3 digit instead of 4 digit
I can't initialize 9030, only can enter 903. Firmware version 1033.
I'm just curious why you didn't use the "Automatic Initialization" button at the bottom of the screen when the firmware finished. 08-9030 is correct, it's just unnecessary to change from 49 mode to 08 mode.Originally Posted by riyadh hossainbd
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Reply With Quote
Bookmarks