Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Location
    Salisbury, MD
    Posts
    151
    Rep Power
    28

    es4540c Place originals in the document feeder

    Hello

    I know that I have seen this one before a couple of years ago but can not remember the answer. I have an es4540c the displays the message "es4540c Place originals in the document feeder" when I try to copy off of the glass. I have noticed that after turning the machine off and on I can copy off the glass until I use the feeder. Once I use the feeder I get the message. I think it might be one of the two sensors that see the adf but wanted some input before driving 2 hours to the customer. Thank you in advance for any help.

  2. #2
    Master Of The Obvious 10,000+ Posts
    es4540c Place originals in the document feeder

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463

    Re: es4540c Place originals in the document feeder

    Check the original detection sensor. If the mount gets bent, the flag will snag on the side of the valley:

    Original Detection Flag Toshiba.JPG

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here