Scan to folder... SMB scanning

[ZeusGT]

Does the Toshiba 350 support SMB scanning?
Is it like the 3511 and will only let you use only two paths to scan to?
Thanks for your time...

[Mr Spock]

Yes they are the same but with the color machines it is built in and with the black and white you need to purchase the print and scan enablers (look like thumb drives).

[ToshibaTech]

Also, yes... it is only able to have Remote Path 1 and 2, however if you check "allow users to select destination..." then you can use templates to set up a lot of different scanning locations. Or the user could just type in their own path when scanning (a little confusing for most.)

[ZeusGT]

Hey, thanks guys for all your help... Is there any Toshiba copier that will allow more than 2 SMB path addresses?

[ToshibaTech]

If you make use of the templates you can create tons of different scan to locations. Just enable "allow users to select destination..." in top access and then when you register each template you can type in a location for each. The difference is the procedure when scanning will have the user pressing the templates button instead of the scan button.

[ZeusGT]

O.k... that does make sense. I'll give that a try. Thanks