My customer has a Toshiba Estudio 757 that has dark background. Changed developer unit with developer. Set developer and same problem. Any help would be appreciated.
My customer has a Toshiba Estudio 757 that has dark background. Changed developer unit with developer. Set developer and same problem. Any help would be appreciated.
May we see an image quality sample? Did you run 05-2000?
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yes. Ran 05-2000. All gray background but can see image.
toshiba 757.pdf
Did the developer balance between 234 and 246? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yes it did
I had a 557 recently that turned out to be wrong toner. It was a Toshiba tube, but I suspect the customer spoon fed it something else.
Like most wrong toner situations, the only place the toner doesn't want to be is in the toner hopper or developing unit. The machine was a toner explosion. When I dumped the developer there were two distinct components that would not mix, the toner and developer. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
This problem happen since e600 series...Check & service toner drive...And drum unit as well especially main charger...
clean the ground contacts in the drum and the drum shaft
Bookmarks