i have toshiba 456, my copier is giving initial print but when i am trying to make copy, paper stuck in registration, i changed board but same issue, someone can help?
i have toshiba 456, my copier is giving initial print but when i am trying to make copy, paper stuck in registration, i changed board but same issue, someone can help?
A jam code might be good to know. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
You're going to have to figure out how to get the jam code, if you really want help. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
The paper jam/stop at drum unit cannot go up? Probably the main drive drum shaft pin broken...
Hi
When the jam paper , the key C and 8 are displayed at the same time as the jam paper error code is displayed.
Sent from my Mi A1 using Tapatalk
the thing that people change mfb boards like shirts its above me. paper jam? change board. lines on copy? change board.
hmmmm could it be those folks don't have a friggin' CLUE?
you can't fix ANYTHING ( printer - car - lawnmower - boat )
by just throwing parts at it.. (unless you're Bill Gates)
you must be in the BALLPARK in the diags
therefore knowing the BASICS of operation of the thing you are working on.
Bookmarks