Thanks: 
Likes: 
Dislikes: i have toshiba 230, i have paper in tray 1 & 2 but machine also saying add paper, tray is not lifting, i clean every thing even i checked lift up motor, everything seems good, someone can help
i have toshiba 230, i have paper in tray 1 & 2 but machine also saying add paper, tray is not lifting, i clean every thing even i checked lift up motor, everything seems good, someone can help
ok so the machine doesn't see paper in the trays...Originally Posted by kashif
what tells the unit that there is paper in the tray?
(hint** paper sensors in tray)
find the sensors in parts IPB... check for proper movement-clean or replace
Both tray's are not lifting, i cleaned all sensor even i also checked lift up motor, everything seems good
clearly "everything is not good"
go back to diagnostics
Broken gears on back of tray, is the motor turning on. Help us out here.
Sent from my XT1635-01 using Tapatalk
gears are ok, motor is not turning on, but manually i checked motor is ok, i am looking code for lift-up-motor in test mode
Those copiers were known for breaking gears in the tray lift gearbox. Remove the gearbox and try and turn either coupler. If you can't than there are gears or the standoffs that hold the gears could be broken within the gearbox. The gearbox is cream colored and has one connector. It sits in the bottom left corner in the back of the copier.
boss i checked that box (Lift-up-Motor) all gear is ok,no any broken
How to justify the tray up motor is working without any output test?
If insert drawer and tray did not lift up and cannot hear any motor noise, most probably the motor problem...
Is very common for this model where the tray up motor black wire easily broken...
If can hear cracking noise when lifting up, probably some gear or the housing is broken...
Reply With Quote
Bookmarks