+ Reply to Thread
Results 1 to 2 of 2

Thread: E Studio 45 c-26 scanner lamp

  1. 10-08-2008 #1
    Rick
    Rick is offline
    Trusted Tech 50+ Posts Rick is on a distinguished road
    Join Date
    Mar 2007
    Location
    Sudbury Ontario
    Posts
    71
    Rep Power
    7

    E Studio 45 c-26 scanner lamp

    I have changed the scanner lamp and lamp control board and still getting
    C-26 . Any ideas ?
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
  2. 10-09-2008 #2
    ToshibaTech
    ToshibaTech is offline
    Service Manager 250+ Posts ToshibaTech is building a good name for himself
    Join Date
    Apr 2007
    Posts
    286
    Rep Power
    9
    That's a peak level detection error. If the scanner lamp is coming on, make sure the lamp is moving under the white refrence plate under the glass. If it is not that is your problem, if it is it could be Lens, CCD, SLG board. First make sure the scanner is moving to read that plate and lighting up though. If not, it could be a problem with the mechanics of the scanner mechanism (motor, cables, pulleys, etc...)
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
+ Reply to Thread
« LANIER 7345 | e-studio4511 keypad sounds »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules