Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Trusted Tech 50+ Posts
    Join Date
    May 2013
    Location
    Narre Warren
    Posts
    52
    Rep Power
    13

    Re: Toshiba 2820c vertical banding

    You can use the ODFC25 Drums in this model (drums for 40 series)
    A lot of Aussie techs use those so they only have to carry one version.

    Sent from my ONEPLUS A6000 using Tapatalk

  2. #12
    Technician
    Toshiba 2820c vertical banding


    Join Date
    Apr 2019
    Location
    Dunedin
    Posts
    15
    Rep Power
    1

    Re: Toshiba 2820c vertical banding

    Quote Originally Posted by clint@clintsimonsen.com View Post
    You can use the ODFC25 Drums in this model (drums for 40 series)
    A lot of Aussie techs use those so they only have to carry one version.

    Sent from my ONEPLUS A6000 using Tapatalk
    thanks, that's helpful. I'm pretty sure I've worked out the problem, which I shouldn't have overlooked, the foam pads have disintegrated on the cyan and k drum casings, I'll try and get more of those now and fix them.

  3. #13
    Master Of The Obvious 10,000+ Posts
    Toshiba 2820c vertical banding

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,534
    Rep Power
    295

    Re: Toshiba 2820c vertical banding

    I can't really tell if it's cyan drum not cleaning or the primary transfer belt not cleaning. The photos do help. You should be able to see this not-cleaning issue without much difficulty on the belt or drum.

    Developing is not perfect, but not horrible either. =^..^=

    Something just occurred to me. If you're not that familiar with the Masherbrum series you might not know that it isn't easy to align the transfer belt cleaner onto the rear post. The trick is to remove the yellow imaging unit, then shine a flashlight in through the opening. Then you can align the cleaning unit onto the rear post amd front "C" shaped receiver. That can account for a recent transfer belt not cleaning issue.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #14
    Technician
    Toshiba 2820c vertical banding


    Join Date
    Apr 2019
    Location
    Dunedin
    Posts
    15
    Rep Power
    1

    Re: Toshiba 2820c vertical banding

    Quote Originally Posted by blackcat4866 View Post
    I can't really tell if it's cyan drum not cleaning or the primary transfer belt not cleaning. The photos do help. You should be able to see this not-cleaning issue without much difficulty on the belt or drum.

    Developing is not perfect, but not horrible either. =^..^=

    Something just occurred to me. If you're not that familiar with the Masherbrum series you might not know that it isn't easy to align the transfer belt cleaner onto the rear post. The trick is to remove the yellow imaging unit, then shine a flashlight in through the opening. Then you can align the cleaning unit onto the rear post amd front "C" shaped receiver. That can account for a recent transfer belt not cleaning issue.
    thanks for that, yes, I spent some considerable time aligning that cleaning unit onto the rear post, shining a torch up there, I got it in the end. I'm pretty sure those foam pads will be the problem, the cyan drum was a bit messy too, I'll update everything in the near future, although the developer has only done 43000 so should have some life left.

    I'll report back when I get those foam pads to say if they fixed it.

  5. #15
    Service Manager 1,000+ Posts
    Toshiba 2820c vertical banding

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    1,540
    Rep Power
    43

    Re: Toshiba 2820c vertical banding

    Toshiba Tec Japan officially discontinued all technical support, part supply and toner production for this copier on March 02 2019.

    Time to put a bullet in the copier and move on.

  6. #16
    Technician
    Join Date
    Jun 2019
    Location
    Twin Falls, ID
    Posts
    13
    Rep Power
    1

    Re: Toshiba 2820c vertical banding

    You may want to pull out the laser unit and check for dust inside the unit.

  7. #17
    Technician
    Toshiba 2820c vertical banding


    Join Date
    Apr 2019
    Location
    Dunedin
    Posts
    15
    Rep Power
    1

    Re: Toshiba 2820c vertical banding

    Quote Originally Posted by BTech21 View Post
    You may want to pull out the laser unit and check for dust inside the unit.
    thanks, I'll try that. The foam pads are all replaced but that didn't fix the problem. The next step is new developer, drum and blade, and I'll look at the laser unit.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here