Have 2 units of used e455c having paper fold mark. Replaced feed & separation roller or swapped whole feeder unit, adjusted the z-fold codes, but problem still persist...
20190403_092411.jpg
Thanks: 0
Likes: 0
Dislikes: 0
Have 2 units of used e455c having paper fold mark. Replaced feed & separation roller or swapped whole feeder unit, adjusted the z-fold codes, but problem still persist...
20190403_092411.jpg
Alignment clutch
Sent from my ONEPLUS A6000 using Tapatalk
I believe these are the loop settings that I got that worked well:
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I've follow these settings, but still the same…Originally Posted by blackcat4866
I don't think is alignment clutch because I did print 10 pages in a row where image not shifting…Anyhow, will try replace it on next visit…
I have seen this issue on that machine. Some times you can disassemble the clutch an clean with alcohol. I would replace the registration clutch.
Reply With Quote
Bookmarks