Hi,
The drum is getting full of toner without any printing and it's shows adding toner message.... after minutes message stopped but drum is still blacked
Hi,
The drum is getting full of toner without any printing and it's shows adding toner message.... after minutes message stopped but drum is still blacked
If drum is full of toner you have problems.
If the drum has full coverage of toner you probably have primary charge loss.
If the drum cleaning unit is filling with waste toner and not augering it out to the bottle, you may have a misalignment of the drum cleaning auger coupler with the coupler on the rear frame.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Check your drum drive and make sure that the roll pin didn't shear off.
is it related main charger? nothing is printing.
Its a bit murky here.
"Nothing is printing." Could mean:
1) I don't see the original image, the page is solid black.
2) I don't see the original image, the page is white.
Can you be a lot more specific? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks