1310

[franc99]

I have a toshiba 1310 with bad fusing: i have changed the thermistor and upper roller but he still poor fusing. Have you an idea to solve this trouble?

[imaginGuru]

Have you tried to change the upper fuser roller bushings as well?
check the pressure roller springs for correct position and/or the lower(pressure)roller has no worn shaft endings either.

if image is good but no fusing is done even though heat is present, then you have a pressure loss somewhere. there's no other thing to blame.

[jawir]

Hi,

Also don't forget to check the bush press, usually it's broken. this part is bush to hold and press the lower roller on the both side of shaft lower roller.

regards

[_____e03_____]

	Quote:			Originally Posted by jawir
	Hi, Also don't forget to check the bush press, usually it's broken. this part is bush to hold and press the lower roller on the both side of shaft lower roller. regards

I agree to sir jawir